Academic Year: 2024 - 2025
The Basic Electronics Kit is included and paid for as part of your tuition fees.
This Basic Electronics Kit is required for the ELN8613 course is designed to provide all the essential components and tools needed for various electronics projects. It includes a variety of resistors, capacitors, LEDs, and other electronic components, along with essential tools for soldering and desoldering.
| Quantity | Description | Part Number |
|---|---|---|
| 1 | Soldering tip | STV-CH24A |
| 1 | Desoldering Pump | SS75DLS |
| 4 | Black BANANA PLUG | 108-0303-001 |
| 4 | Red BANANA PLUG | 108-0302-001 |
| 2 mtr | Black test lead wire | |
| 2 mtr | Red test lead wire | |
| 1 | Lead free solder 1.00mm dia. | 20g tube |
| 2 | Soldering sponge with slits | TC205 |
| 1 | Rosin Flux Pen for lead-free soldering | 835-P |
| 1 | 10 Lug Tie Point Strip | 831 keystone |
| 1.25 mtr | 20 gauge stranded wire | |
| 1 mtr | 24 gauge stranded wire | |
| 1 foot/30 cm | Dry wick | 18165F |
| 3 feet | Bus wire 18ga | 296 |
| 1 x | ATMega328P (28 DIP, with Optiboot bootloader) | DEV-10524 |
| 1 x | 16MHz Crystal (22pf load capacitance) | |
| 1 x | LM7805 5V Regulator (TO-220) | |
| 1 x | L78L33 3.3V Voltage Regulator (TO-92) | |
| 1 x | 3mm Green LED | |
| 1 x | 3mm Blue LED | |
| 2 x | 330Ω, 1/4 W, 5% Resistor | |
| 1 x | 10kΩ, 1/4 W, 5% Resistor | |
| 1 x | 1MΩ, 1/4 W, 5% Resistor | |
| 2 x | 22pF Ceramic Capacitors (small format) | |
| 5 x | 0.1μF Ceramic Capacitors (small format) | |
| 2 x | 10μF, 25V Electrolytic Capacitors | |
| 1 x | Diode 1N4001 | |
| 1 x | Resettable Fuse PTC (300mA) | |
| 1 x | Push Button (N.O., 6x6mm) | |
| 1 x | DC Barrel Jack, Sparkfun PRT-00119 or similar | |
| 1 x | 28-Pin DIP Socket | |
| 1 x | Headers 6-Pin Female | |
| 2 x | Headers 8-Pin Female | |
| 1 x | Headers 10-Pin Female | |
| 1 x | Headers 2X3-Pin Male | |
| 1 x | Headers 6-Pin Male Right Angle | |
| 1 | Dev. Board FT232RL | TEFT232DB |
Total Number of items in Kit: 40
Start typing and press enter to search